LeftyBassist.com

Hey all!

I have a couple of necks that I would like to pass on to someone who may be in need. There is a G&L Tribute with the 1-1/2" nut spacing and a USA Customs that I got from Pete (Screambasses) that is a Fretless with 1-1/2" nut as well.
The G&L has not been mounted. The only thing I have done was to start the fret work, here just the start of the rounding of the fret ends. It will come with a set of Licensed Ultralite tuners and I can supply a string retainer if it is wanted.
The USA Custom has a tongue oil finish on the back of the neck, the board and headstock face has a thin coat of lacquer. This too will come with a set of Licensed Ultralites and nut and string retainer. This has been installed on two different basses, one of them was a Fender Jazz bass.
I am asking $70.00 for the G&L and $85.00 for the USA Custom. Shipping is free in the USA only. Let me know if there are any questions.
Thanks!

Bill

More pictures

and more....

one more.... The center hole is from the locator pin during the CNC process.

From the receipt I still have:

BASS NECK (LPED)****LEFT HANDED NECK****,
*****ROUNDED HEEL*****, HEEL
ADJUST, 21 FRETS, MPL/BM, J-WIDTH,
.850" C CONTOUR, 7.25" RADIUS, "NO"
LINES FRETLESS NECK******, HIPSHOT
TUNER HOLES, ***NFD****/FRETLESS
POSITION BLACK SIDE DOTS, ROLLED
EDGES. ($20.00 OFF ON NECK)
1 214.00 214.00

Hi Bill,

Does the fretless neck have markers on the side? Could you maybe post a photo of it?

Thanks

J-meister wrote:Hi Bill,

Does the fretless neck have markers on the side? Could you maybe post a photo of it?

Thanks

"FRETLESS POSITION BLACK SIDE DOTS"

They're in the fretless position, not the fretted.

pete

Damn, Thanks Pete! Can't have you do all the work though, here a side dot picture.

The G&L Tribute neck has SOLD!

Thanks for the info & pics, guys.

Are the markers on the 'fretline', or are they positioned in the middle between two 'frets'?

It is a true fretless neck, so I would say that it is on the fret line. I seem to remember it that way as well.

Did you ever sell the fretless neck?

Good Morning!

I have not, it is still available!