LeftyBassist.com

The online home for southpaw bassists.
It is currently March 28th, 2024, 7:21 am




Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Saddles Bottoming Out
PostPosted: March 23rd, 2014, 10:36 am 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
I have a '78 Fender Jazz Bass and I have had constant problems with the height adjustment screws working themselves down as I play. It can take as little as one song to completely bottom the saddle out, ONLY ON THE E STRING.
I have replaced the saddle 4 times now with brand new saddles.
The current bridge is a brand new Fender 70s Reissue. The replacement saddles have all been brand new Fender 70s RI saddles.
The break angle of the string over the saddle seems just fine.
And I'm not interested in using nail polish or loctite to fix this. A new bridge shouldn't have this problem.
There is apparently another issue going on here. Has anyone had something like this happen?
Thanks!

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 23rd, 2014, 12:26 pm 
Offline
User avatar

Joined: June 15th, 2009, 8:03 am
Posts: 1341
I've had conversations about this with some people and the general consensus is that it's all about the bottom line.

When tolerances are set too high and the fit is too perfect it slows down the assembly process... They also have to sometimes re-tap the threads after the finishing process. Lower tolerances allow for better fits and faster assembly, but are prone to settling when the instrument vibrates.

I hate to say it, but I think you're destined to have to use nail polish. If you use a toothpick, dip it in and just drag it across the threads, it'll be enough to hold it in place, but not so much that it gums it up and makes it hard to adjust.

_________________

F Bass BN5 • ZON Legacy Elite 5 • ZON Sonus Elite 5 Fretless • ZON Sonus BG5 • Fender Custom Shop '64 NOS Jazz • Fender Custom Shop '75 NOS Jazz • Fender ADE Precision • Music Man SR4


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 23rd, 2014, 12:29 pm 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
Yeah, it looks like it's either that or grab a Babicz and slap it on there. :evil:

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 23rd, 2014, 3:02 pm 
Offline
His Majesty
His Majesty

Joined: March 11th, 2008, 7:25 pm
Posts: 185
Location: nashville tennessee
Is that your only bass with that style bridge? If not then I assume the other bass doesn't do this?

And the E only thing, do you think that's due to it being the only string with enough umph to move the height screws?

Also, to be clear about the times you've replaced the saddles, did that include new screws or did you re-use the old ones in the new saddle?

Either way did you try swapping say the screws out of the G into the E saddle to see if the bottoming problem "followed" the screws to the G string?

Yes, I'm OCD on chasing down BS like this. :oops:

I'll look into this further.

_________________
As not seen on TalkBass!


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 23rd, 2014, 3:06 pm 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
I did replace the screws

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 23rd, 2014, 9:39 pm 
Offline
User avatar

Joined: August 1st, 2009, 6:19 pm
Posts: 1329
Location: Sint Maarten, N.A
I would just replace the the saddles by threaded Fender saddles


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 24th, 2014, 9:15 am 
Offline
His Majesty
His Majesty

Joined: March 11th, 2008, 7:25 pm
Posts: 185
Location: nashville tennessee
Matt,

not meant to hijack your thread but thought I would shoehorn in this vid from Fender on a newish (to me at least) bridge.


http://www.youtube.com/watch?feature=pl ... mJOvIqcrjw

_________________
As not seen on TalkBass!


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 24th, 2014, 1:15 pm 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
I just bought a Babicz. Oh, and I hate TalkBass.

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 24th, 2014, 1:53 pm 
Offline
User avatar

Joined: March 14th, 2008, 10:57 am
Posts: 2865
Matt R. wrote:
Oh, and I hate TalkBass.

Not as much as I do. There's just SO much b.s. to cut through! I don't even like shopping the classifieds there, it gets so annoying!!


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 24th, 2014, 1:57 pm 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
It's like a huge sorority house where everyone's periods are synced up. Everyone is looking for a fight. Dicks.

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 24th, 2014, 11:51 pm 
Offline
User avatar

Joined: August 1st, 2009, 6:19 pm
Posts: 1329
Location: Sint Maarten, N.A
Matt R. wrote:
It's like a huge sorority house where everyone's periods are synced up. Everyone is looking for a fight. Dicks.


You shall soon be excommuniated from TB :lol:


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 7:12 am 
Offline
User avatar

Joined: March 10th, 2008, 7:00 pm
Posts: 1184
Location: Seattle, WA USA
Teflon tape can be your friend here. Which variety to choose will depend on how much slop you need to overcome. I've used the regular white type on many occasions, but the yellow type (for natural gas pipe threads) might work for cases where the Grand Canyon seems like a close squeeze


and not to hijack, but this same loose tolerance approach is common to trussrods as well. I have done repairs on several Fender basses where it appeared the TR was stripped, but having a new nut machined with tighter thread tolerances got the TR back into working order without any further issues

R

_________________
Moderator: Blueprinting and Bondo
Pickups: Honey Badger Pickups - Like Honey Badger Pickups on Facebook!
Basses: Regenerate Guitar Works - Like Regenerate Guitar Works on Facebook!


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 7:34 am 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
Thanks guys. I understand that short of replacing the bridge with a Babicz (which I'm doing now), thread tape or loctite or nail Polish is the only option for this particular bass.

I posed this question (copied and pasted) on TalkBass as well, hoping that between here and there I might get insight into why my bass is doing this after multiple saddle replacements.
It seems it's just how this particular hunk of ash vibrates that causes the issue, so the locking saddles on the Babicz will cure the problem.

And thanks for being constructive in your answers fellas. Pretty stark contrast to TalkBass, which is crammed with assholes. They acted like I am a fucking moron for presenting this question.

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 11:45 am 
Offline
User avatar

Joined: April 5th, 2008, 4:52 pm
Posts: 359
Wow man I just read your thread over at TB. WTF is wrong with people? If they can't come to grips with a silly little thing like you wanting to get to the root cause of the problem instead of using a workaround, I can't imagine how they handle real life.. :?


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 11:58 am 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
I know man. Thanks, I was beginning to think I might be losing my mind after the douchebag pile up session over there, but quickly realized I was just talking to a collection of insufferable assholes. I felt like my original post was pretty fucking black & white. Haha.

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 2:27 pm 
Offline
User avatar

Joined: March 14th, 2008, 10:57 am
Posts: 2865
Stingray5 wrote:
Wow man I just read your thread over at TB. WTF is wrong with people? If they can't come to grips with a silly little thing like you wanting to get to the root cause of the problem instead of using a workaround, I can't imagine how they handle real life.. :?

Matt,
at least you got some clear thinking folks offering some good real-world solutions. But it looks to me like the ratio of doughwad-to-reasonable responses was 10:1


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 2:32 pm 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
AzWhoFan wrote:
Stingray5 wrote:
Wow man I just read your thread over at TB. WTF is wrong with people? If they can't come to grips with a silly little thing like you wanting to get to the root cause of the problem instead of using a workaround, I can't imagine how they handle real life.. :?

Matt,
at least you got some clear thinking folks offering some good real-world solutions. But it looks to me like the ratio of doughwad-to-reasonable responses was 10:1


Very true, my friend.

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 3:15 pm 
Offline
User avatar

Joined: March 14th, 2008, 1:45 pm
Posts: 3910
Location: Huntsville, AL
Bleccch.

http://www.talkbass.com/forum/f18/strin ... t-1064964/

_________________
http://www.facebook.com/profile.php?id= ... ef=profile

www.twitter.com/ReallyMattRoss

Penguins is practically chickens.


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 3:33 pm 
Offline
User avatar

Joined: March 14th, 2008, 10:57 am
Posts: 2865
12:1 :lol:


Top
 Profile  
Reply with quote  
 Post subject: Re: Saddles Bottoming Out
PostPosted: March 25th, 2014, 4:16 pm 
Offline
User avatar

Joined: January 30th, 2010, 9:46 am
Posts: 431
Yeah, I just stumbled on that thread myself.

You just gotta ignore the trolls, man. Anything else will only fan the flames.

_________________
<( 0_0 )>


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 29 posts ]  Go to page 1, 2  Next


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits