Mike Lull PJ4
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Mike Lull PJ4
New Mike Lull PJ4. Not even an hour playing time on this one. It has to go 'cause I need the funds for personal reasons that I didn't know about when I ordered this bass).
Specs:
Body: swamp ash
Color: sherwood green
Neck: maple, graphite reinforced
Fingerboard: BRAZILIAN rosewood, 7.25" radius, MOP dot inlays
Scale: 34"
Frets: 20, medium jumbo
Nut: 1.5", bone
Tuning machines: Hipshot Ultralites, D-tuner
Pickups: Lindy Fralin
Electronics: Aguilar OBP-1 (18v), active/passive switchable (tone control works in both active and passive modes)
-> layout: vol/bal/tone (push/pull for active/passive)/stacked EQ
Weight: about 8 lbs
Other:
shielded completely
PLEK'ed
Schaller straplocks pre-installed
comes with custom made original hardshell case
Retail on this bass was $4xxx, shipping costs $300, duties and taxes $635. Please keep in mind that this bass is NEW. I also have the certificate from Mike Lull that this bass was built in September 2010, as well as the form of UPS to confirm that this bass has arrived at my house only a few days ago (end of September 2010).
I'm looking to sell this bass in person, so no shipping at the moment. I'm open to offers, but keep it reasonable, please. You can find pics here: http://www.mikelull.com/PJ4%20Lefty%20M ... 0Build.htm. For more detailed pics or other questions you may always send me an e-mail: the_musicfreak@hotmail.com.
EDIT: in case you didn't notice: I'm located in Antwerp, Belgium.
Thanks for looking.
Specs:
Body: swamp ash
Color: sherwood green
Neck: maple, graphite reinforced
Fingerboard: BRAZILIAN rosewood, 7.25" radius, MOP dot inlays
Scale: 34"
Frets: 20, medium jumbo
Nut: 1.5", bone
Tuning machines: Hipshot Ultralites, D-tuner
Pickups: Lindy Fralin
Electronics: Aguilar OBP-1 (18v), active/passive switchable (tone control works in both active and passive modes)
-> layout: vol/bal/tone (push/pull for active/passive)/stacked EQ
Weight: about 8 lbs
Other:
shielded completely
PLEK'ed
Schaller straplocks pre-installed
comes with custom made original hardshell case
Retail on this bass was $4xxx, shipping costs $300, duties and taxes $635. Please keep in mind that this bass is NEW. I also have the certificate from Mike Lull that this bass was built in September 2010, as well as the form of UPS to confirm that this bass has arrived at my house only a few days ago (end of September 2010).
I'm looking to sell this bass in person, so no shipping at the moment. I'm open to offers, but keep it reasonable, please. You can find pics here: http://www.mikelull.com/PJ4%20Lefty%20M ... 0Build.htm. For more detailed pics or other questions you may always send me an e-mail: the_musicfreak@hotmail.com.
EDIT: in case you didn't notice: I'm located in Antwerp, Belgium.
Thanks for looking.
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
No one?
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
Also prepared to ship within Europe now!
- reynoldbot
- Posts: 208
- Joined: November 30th, 2009, 5:38 am
- Location: Minneapolis
Re: Mike Lull PJ4
That's a fine lookin bass. Post some pictures in this thread and you might generate more interest. Good luck!
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
Pics:
- Attachments
-
- DSC_7560.JPG (89.42 KiB) Viewed 16162 times
-
- DSC_7557.JPG (62.89 KiB) Viewed 16163 times
-
- DSC_0010.JPG (82.44 KiB) Viewed 16160 times
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
More:
- Attachments
-
- DSC_7563.JPG (96.51 KiB) Viewed 16158 times
-
- DSC_7556.JPG (122.15 KiB) Viewed 16152 times
Re: Mike Lull PJ4
wow - considering the CITES restrictions on endangeres species trafficking, how were you able to obtain a USA made instrument with a Brazilian Rosewood fretboard? This has definitely got to be a rare beast in Europe
all the best,
R
all the best,
R
Moderator: Blueprinting and Bondo
Pickups: Honey Badger Pickups - Like Honey Badger Pickups on Facebook!
Basses: Regenerate Guitar Works - Like Regenerate Guitar Works on Facebook!
Pickups: Honey Badger Pickups - Like Honey Badger Pickups on Facebook!
Basses: Regenerate Guitar Works - Like Regenerate Guitar Works on Facebook!
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
I guess so. Roger Sadowsky offers Brazilian rosewood too. When I was in NYC this summer, I spoke with Kevin of Sadwosky about it, and he told me it's a pile of wood Roger bought a few decades ago. I guess there are some piles of that wood still available from the time it was still allowed, but don't quote me on that, just a guess.
Re: Mike Lull PJ4
yep thats the deal with sadowsky - he was able to put it on mine last year - he has a big "pre" regulation pile of it stashed somewhere - i bet mike does too...
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
bump...
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
Trade-ins or trade + cash offers also welcome!
Re: Mike Lull PJ4
F Bass BN5 • ZON Legacy Elite 5 • ZON Sonus Elite 5 Fretless • ZON Sonus BG5 • Fender Custom Shop '64 NOS Jazz • Fender Custom Shop '75 NOS Jazz • Fender ADE Precision • Music Man SR4
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
Or it is the same, or it's its identical twin... Weird indeed. However, I ordered it through them, so they might have used it for photographic purposes... Just a guess, though.
Re: Mike Lull PJ4
I wonder if they mistakenly ordered your bass twice... ?
I've had email discussions with Beaver Felton about lefties before and he made it sound like stocking them is a total pain in the ass... and the only lefties they ever really order for stock these days are very generic popular models like black Stingrays, etc. He won't accept any lefty trade offers either... I've tried.
I'm probably wrong, but, to me, it seems very odd that they would order a lefty Mike Lull bass with such unique features unless it was a mistake or duplicate order of some kind.
I've had email discussions with Beaver Felton about lefties before and he made it sound like stocking them is a total pain in the ass... and the only lefties they ever really order for stock these days are very generic popular models like black Stingrays, etc. He won't accept any lefty trade offers either... I've tried.
I'm probably wrong, but, to me, it seems very odd that they would order a lefty Mike Lull bass with such unique features unless it was a mistake or duplicate order of some kind.
F Bass BN5 • ZON Legacy Elite 5 • ZON Sonus Elite 5 Fretless • ZON Sonus BG5 • Fender Custom Shop '64 NOS Jazz • Fender Custom Shop '75 NOS Jazz • Fender ADE Precision • Music Man SR4
Re: Mike Lull PJ4
French luthier Christian Noguera (awesome luthier BTW) also offers Brazilian Rosewood on his bass :


This came for his quite old stock of wood... maybe one of the best wood for bass lutherie winthin France.


This came for his quite old stock of wood... maybe one of the best wood for bass lutherie winthin France.
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
Bump + reminder: FS/FT within Europe
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
bump...
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
bump
-
Musicfreak1988
- Posts: 105
- Joined: February 21st, 2009, 8:48 am
- Location: Antwerp, Belgium
Re: Mike Lull PJ4
bump...
soundclip on request
soundclip on request
- Attachments
-
- PJ4-Green-2_opt kopie.jpg (234.29 KiB) Viewed 14463 times