LeftyBassist.com
http://www.leftybassist.com/

Introducing the RGW Heritage Tribute '55®
http://www.leftybassist.com/viewtopic.php?f=19&t=967
Page 1 of 5

Author:  Rodent [ May 19th, 2009, 4:29 pm ]
Post subject:  Introducing the RGW Heritage Tribute '55®

Here's the specs for this first lefty build of my new Heritage Tribute® line ...

* Swamp Ash body finished in semi-transparent 'vintaged' white (custom brewed color that will only be available in a lefty, and definitely NOT pinkish!)
* offset 2-piece body glue line, just like the originals
* forearm and tummy contours, 3/8"R round over edges
* quartersawn Maple/Maple neck with 1-5/8" nut and modern P-styled profile, zero-fret, 6230 alloy frets, dual graphite stiffening bars, bone nut, black face/side dots, vintage tinted satin finish
* custom RGW 'Heritage Series' headstock for that vintage headstock vibe
* Nordstrand SCPB '54 style pickup with raised pole pieces
* Hipshot 1/2" post Ultralight tuners with clover keys
* Replica '54 Tele twin saddle bridge with thru-body stringing
* Black pickguard
* CTS 250K pots with Orange Drop .047uf cap
* Electrosocket side jack
* chrome hardware
* trussrod adjustment slot in body (but not pickguard)
* custom lefty polished stainless control plate

The custom lefty control plates for this series just arrived this afternoon, and they are absolutely K-I-L-L-E-R :shock: and far above what I had been hoping for 8-) I'm not revealing my source for these at this time since I'd like to bring a few of these basses into production as a reward for my 18+ month quest to get these custom lefty control plates produced.

Additional details on this series can be found on the RGW website http://regenerateguitarworks.com

all the best,

R

Author:  Rebel [ May 21st, 2009, 8:06 am ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

I can't wait to see what it will look like when it's done! :) I've been on your website and I am very impressed with the way your basses look

Author:  andrew [ May 21st, 2009, 10:25 am ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

Rebel wrote:
I can't wait to see what it will look like when it's done! :) I've been on your website and I am very impressed with the way your basses look


+1. Really looking forward to it Rod.

Author:  Rodent [ June 19th, 2009, 3:35 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

experiencing a significant backup at the CNC & paint shops, so this is progressing slower than I had hoped :(

images coming 'soon'

R

Author:  Rodent [ June 24th, 2009, 3:51 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

the neck is ready for detail sanding, and after it's fit to the neck pocket this will be off to the finishing shop

Image
Image

Here's your first glance at the official RGW 'Heritage' Series 4-string headstock - essentially my take on the original '51 styled headstock. Similar enough to not cause issues with your bandmates, but different enough to not cause me legal issues. The 5-string version is 5 in-line tuners with a similar shape

Images of the body coming soon ...

all the best,

R

Author:  andrew [ June 24th, 2009, 7:05 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

Hey, I like that headstock design!

Author:  Rodent [ June 25th, 2009, 5:06 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

as of this posting, the lefty body is still in the CNC shop queue. in the interim, here's what that same body configuration looks like for its righty sibling

Image
Image
Image

you can see the offset body seam in the last image - just like Fender made their early bass bodies. this righty unit will be a 2-tone vintage burst finish, and with the body seam as clean as it is (the guys at the CNC shop did a stellar matching job, eh?!!) it will appear to the casual observer as if this was a 1-piece blank (I will definitely be certain this is advertised as a 2-piece blank), and I guess from a mechanical perspective it's about as close to a 1-piece body as you can had with a 2-piece


since this is the Tribute '55 model, you can see it has the arm and gut contours. also noteworthy is that only the Extreme models contain the rear control cavity routing - the Heritage and Heritage Plus don't utilize a pre-amp, so there's no point in paying for machine time to route an unneeded cavity

all the best,

R

Author:  Jeroen [ June 25th, 2009, 11:27 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

It wasn't until I scrolled down to that sideshot of the body that I noticed it was a 2-piece instead of a 1-piece. Very well-matched!

Author:  Rebel [ June 26th, 2009, 11:46 am ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

Already lookin good Rodent! :D i like that headstock design

Author:  AzWhoFan [ June 26th, 2009, 1:41 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

Jeroen wrote:
It wasn't until I scrolled down to that sideshot of the body that I noticed it was a 2-piece instead of a 1-piece. Very well-matched!

Yup, had me completely fooled. I still can't really see where the demarcation line is on the top. The eyes are the first thing to go ....

Author:  Rodent [ June 27th, 2009, 3:58 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

here's Round 1 of the pickguard design. I still need to tweak it a little bit, but at least I'm reasonably satisfied with the initial design and placement of the 4-hole control plate. the pickguard will not contain a trussrod adjustment slot (it's an option) for aesthetic purposes, but there is a slot cut in the body so adjustment is as simple as removing 9 little pickguard screws (and NOT the neck!)

Image

once I have this where I like it I'll route the control cavity hole in the top and locate the bridge soapbar pickup

all the best,

R

p.s. apologies for utilizing this righty body as reference, but that's a lefty neck in the pocket if it makes anybody feel any better :D

Author:  Rebel [ June 29th, 2009, 6:19 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

aw, sweet! :D 8-)

Author:  Rodent [ July 1st, 2009, 4:38 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

all the body mods completed on this one, so it's off to the finishing shop when the friendly UPS guy steps into the shop for a pick-up

Image

now I'm just tapping my fingers waiting for the lefty Heritage body that actually goes with this thread to show up from the CNC shop ... waiting ... waiting ... waiting ...

all the best,

R

Author:  Rodent [ July 14th, 2009, 5:23 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

both units (bodies and necks for the righty HPE shown and the lefty HT '55 model) are now in the finishing shop. I'm real pleased with how they're coming out so far. more images in a few weeks ...

all the best,

R

Author:  Rebel [ July 16th, 2009, 4:22 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

Can't wait :D

Author:  Rodent [ July 25th, 2009, 7:39 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

received a note this week that my -entire- backlog at the finish shop arrived back at the CNC shop this past week. I anticipate a rather large shipment will be arriving this coming Thur/Fri. new images as soon as I can snap a few :)

all the best,

R

Author:  Rodent [ July 30th, 2009, 3:21 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

sad to report that everything was in -except- for the HT '55 4-string lefty :cry:

I'll be taking images this evening of the righty HPE last seen above in its unfinished state. It came out gorgeous, as did it's 5-string cousin. Just for fun, here's a peek of the B&B 5-string neck's headstock fresh from the finishing shop

Image

edited to add an image of the first neck/body test fit post finish

Image


all the best,

R

Author:  Rodent [ August 3rd, 2009, 2:39 pm ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

edited to replace my previous post ...

here's an image of the major component test fit. nothing is secured in place, and the locations are close but still approximate ... all this will change later this week. if all goes well I should be test driving this one before too much longer

Image

I'm not so sure I like the pickguard color with the vintage 2-tone burst on this one. I'm seriously rethinking my decision, and am leaning more towards a solid black guard with every passing second

all the best,

R

Author:  pjmuck [ August 4th, 2009, 8:04 am ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

Rodent wrote:
I'm not so sure I like the pickguard color with the vintage 2-tone burst on this one. I'm seriously rethinking my decision, and am leaning more towards a solid black guard with every passing second

all the best,

R


Black was my immediate thought as well. But you know what, I love the look of a white pickguard on a '55 as well, even if your finish isn't tobacco burst:

http://images.google.com/imgres?imgurl=http://www.gbase.com/files/store_images/gear/2114376/p1_uhnwy0xhz_so.jpg&imgrefurl=http://www.gbase.com/gear/fender-precision-bass-1955-sunburst-1&usg=__cAOlYDeUGYWYMfkFB1r_Ruw7VZs=&h=750&w=500&sz=51&hl=en&start=15&tbnid=90zbXSKuWjhVhM:&tbnh=141&tbnw=94&prev=/images%3Fq%3D1955%2Bprecision%26gbv%3D2%26hl%3Den%26safe%3Doff

Author:  AzWhoFan [ August 4th, 2009, 8:57 am ]
Post subject:  Re: Introducing the RGW Heritage Tribute '55®

I think you should go with a clear see-through guard. That wood is too good looking to be hidden behind a guard.

Page 1 of 5 All times are UTC - 8 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/