LeftyBassist.com

The online home for southpaw bassists.
It is currently March 28th, 2024, 2:41 am




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Reverse truss rod???
PostPosted: August 3rd, 2019, 7:56 am 
Offline
User avatar

Joined: March 9th, 2008, 7:46 am
Posts: 3851
Location: West Orange, NJ
Okay, I'm hoping somebody can explain this to me.

I received my new Backlund Rockerbox bass yesterday. It arrived poorly set up, with terrible fret buzz and fretting out at the 1st fret, so I decided to adjust the neck for more relief since it was slightly forward bowed. To my surprise, when I turned the truss rod in the usual direction to add relief - clockwise - it made it worse, as it was actually tightening the truss. After some confusion, I decided to turn it counter clockwise instead and that did the trick. The bass plays beautifully now.

I've only encountered a truss rod that operated in the opposite direction on one other bass in my lifetime, so I'm wondering if there are actually lefty and righty truss rods or something's not right.


Top
 Profile  
Reply with quote  
 Post subject: Re: Reverse truss rod???
PostPosted: August 3rd, 2019, 8:55 am 
Offline
User avatar

Joined: January 9th, 2009, 1:34 am
Posts: 2153
Location: The Netherlands
My Status basses have reverse truss rods too I think.

_________________
My Facebook-profile


Top
 Profile  
Reply with quote  
 Post subject: Re: Reverse truss rod???
PostPosted: August 3rd, 2019, 3:20 pm 
Offline

Joined: March 30th, 2013, 12:58 pm
Posts: 923
pjmuck wrote:
Okay, I'm hoping somebody can explain this to me.

I received my new Backlund Rockerbox bass yesterday. It arrived poorly set up, with terrible fret buzz and fretting out at the 1st fret, so I decided to adjust the neck for more relief since it was slightly forward bowed. To my surprise, when I turned the truss rod in the usual direction to add relief - clockwise - it made it worse, as it was actually tightening the truss. After some confusion, I decided to turn it counter clockwise instead and that did the trick. The bass plays beautifully now.

I've only encountered a truss rod that operated in the opposite direction on one other bass in my lifetime, so I'm wondering if there are actually lefty and righty truss rods or something's not right.


It wouldn't be a right-handed vs left handed neck issue. It would be that the truss rod is reversed threaded or (thou ironic in this case) more commonly called left handed threads.


Top
 Profile  
Reply with quote  
 Post subject: Re: Reverse truss rod???
PostPosted: August 3rd, 2019, 4:23 pm 
Offline
User avatar

Joined: December 9th, 2014, 5:27 pm
Posts: 3489
Location: Beantown
Now this is a true lefty bass!


Top
 Profile  
Reply with quote  
 Post subject: Re: Reverse truss rod???
PostPosted: August 5th, 2019, 6:46 am 
Offline

Joined: November 20th, 2008, 7:01 am
Posts: 314
I have encountered ONE other bass in my long career of repairing instruments. I cannot mention the name of the luthier, because he's kind of close to me in location, and since he's a good guy, it would be foolish to claim he made a mistake. In my opinion, he did. He installed a double acting rod in a righty custom build, and it stumped me, until, I also tried turning it in the opposite way. Since the square bar on top of the threaded rod, is down, not directly under the board, it works in reverse operation. In my view, that square bar, is how the neck remains stable, exerting strong, uniform pressure directly under the board. The neck itself isn't all that great, but the owner digs the way it plays, so, all is well. So, the answer, is yes. But only one.


Top
 Profile  
Reply with quote  
 Post subject: Re: Reverse truss rod???
PostPosted: January 1st, 2021, 10:17 pm 
Offline
User avatar

Joined: July 9th, 2012, 10:30 am
Posts: 486
Location: Seattle, WA
I'm reviving an old thread. I've started setting up my basses vs outsourcing, beyond just changing strings and cleaning. Getting into truss rod adjustment, action, intonation, etc. I've done about 3 or 4 basses and lo and behold, I'm finding inconsistencies with the direction of the truss rod turn! I've gotta note down which basses turn which way! It's a bit frustrating, especially on the older basses, where it might take a few days for the truss rod to adjust cause it might not have been turned in ages... and I'm not 100% sure now if I'm turning it the right way! So yes, at least one of my basses has the truss rod turning the opposite way from the others - I wish I wrote down which one cause now I can't remember, but I am sure noting this if I run into it again moving forward! The plight of the lefties!!! :-)


Top
 Profile  
Reply with quote  
 Post subject: Re: Reverse truss rod???
PostPosted: January 11th, 2021, 2:15 pm 
Offline
User avatar

Joined: March 14th, 2008, 10:57 am
Posts: 2865
Just the other day I was talking to my tech about this same phenomenon. According to him, there is no standard in truss rod orientation.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 


Who is online

Users browsing this forum: No registered users and 27 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits